Rattling or Thumping Pipes – Cures

These cures relate to general rattling or banging when you turn the tap on.

The various reasons for these noises, and their cures are:

Air in Pipes
Typically occurs in new systems, or after some plumbing alterations. You need to purge the air from the system. To do this

  1. Start at the lowest tap or valve and slowly turn on to full. If there is some spluttering leave on until the water runs smoothly then turn off.
  2. Go to the next lowest tap and repeat the procedure, continue working your way around the house until you reach the highest outlet.
  3. Don’t forget outside taps, toilet cisterns and shower heads.

Steam in Pipes
Can affect solar hot water systems and hydronic heating. Generally means the system is running too hot.

  • For solar systems the first thing is to reduce the temperature for the circulation pump start. This will take the hot water from the panels at a lower temperature. If that doesn’t work it may be the storage tank is too small for the area of panels. If you can’t afford a bigger tank shading the panels on summer days can help.
  • For Hydronic heating systems you will need to lower the boiler thermostat.

Insufficient Fixing of Pipes
Affect all sorts of plumbing systems. May need a combination of four different approaches

  • Pack around any loose pipe clips.
  • Install additional clips between existing clips.
  • Install pipe insulation.
  • For pipes in cavities push foam tube insulation along the pipe so it stops the pipe banging on the walls.

If the problem is a bang when you turn the tap off then you need to see the post on Water Hammer.

One thought on “Rattling or Thumping Pipes – Cures”

Comments are closed.

Exit mobile version