Tips To Prevent Plumbing Disasters In Your Home
Guest post by Cyrel Nicolas
It’s happened to all of us – we’re in the middle of a busy day and suddenly, we hear that telltale gurgling noise coming from our plumbing.
Before we know it, water is pouring out from under the bathroom sink, and we’re left with a big mess to clean up.
Fortunately, there are a few things you can do to help prevent these disasters from happening in the first place.
Keep reading for some helpful tips on avoiding plumbing emergencies.
Inspect your plumbing system regularly.
Plumbing is one of the most important systems in any home, and it’s important to keep it in good working order.
One way to do this is to regularly inspect your plumbing system for any cracks or corrosion.
Cracks can allow water to leak out, which can lead to serious damage.
Corrosion can weaken pipes and fixtures, making them more likely to fail.
Through regular inspection of your plumbing system, you can help to prevent these problems and keep your home in good condition.
Check your water pressure.
Water pressure that’s too high can be just as damaging to your plumbing system as water pressure that’s too low.
Water pressure that’s too high can cause water leaks, while water pressure that’s too low can lead to water hammering.
Uneven water pressure can also cause problems.
Water pipes are designed to handle a specific range of water pressure, if the water pressure in your home is outside of this range, it can put a strain on your pipes and cause problems.
You can check your water pressure with a water pressure gauge.
The ideal water pressure for most homes is between 40 and 60 psi.
If your water pressure is outside of this range, you may need to adjust it.
You can usually adjust your water pressure by turning a knob on your water main.
If you’re not sure how to adjust your water pressure, you should contact your local plumber in Bexley, NSW.
They’ll be able to help you adjust your water pressure and make sure that it’s within the proper range for your home.
Checking and adjusting your water pressure is an important part of maintaining your plumbing system and avoiding plumbing disasters.
Pipe Insulation
Pipe insulation is an important part of any home’s winter weatherproofing.
It helps to prevent your pipes from freezing and bursting, which can cause major damage to your home and be expensive to repair.
Pipe insulation is available in a variety of materials, including foam, fiberglass, and rubber.
It’s important to choose the right type of insulation for your pipes, as some materials are better suited for certain types of pipes.
For example, rubber insulation is often used for copper pipes, as it provides a good seal and is easy to install.
Pipe insulation is relatively inexpensive and easy to find, making it a great way to protect your home from cold weather.
Never pour greasy substances down the drain.
Grease, fat, and oil are commonly found in the kitchen, and it’s easy to pour them down the drain when you’re finished cooking.
However, these substances can harden over time, causing clogs that can be difficult to remove.
In addition, they can interact with other substances in your pipes, such as soap, to create a sticky mess that will only get worse with time.
As a result, it’s important to avoid pouring greasy substances down the drain.
Instead, let it cool and solidify before disposing of it in the trash.
If you do accidentally pour grease down the drain, there are a few things you can do to try to avoid a clog:
-
- Flush the drain with hot water.
- Pour a cup of baking soda down the drain and follow it with a cup of vinegar.
- Let the mixture sit for an hour before flushing again with hot water.
- Finally, run the disposal unit or garbage disposal to grind up any remaining grease.
By following these steps, you can help avoid clogged drains and keep your kitchen plumbing running smoothly.
Fix any leak immediately.
One of the most common causes of water damage in homes is leaks.
Leaks can occur in a number of places, such as in pipes, faucets, or in the roof.
Even a small leak can quickly lead to extensive water damage, so it is important to fix any leaks as soon as they are discovered.
The sooner a leak is fixed, the less likely it is to cause extensive damage.
Fixing a leak often requires only a few simple tools and supplies, and can be completed in just a few minutes.
However, the longer a leak is left unfixed, the more difficult it becomes to repair, and the greater the risk of water damage.
Therefore, it is always best to fix any leaks as soon as they are discovered.
Have a plumber check your system annually.
Although it’s easy enough to take care of small plumbing problems as they come up, ignoring them can lead to bigger (and more expensive) issues down the road.
That’s why we always recommend having a Belrose plumber check your system annually and address any potential problems before they turn into full-blown disasters.
By taking a few preventative measures now, you can save yourself a lot of trouble – and money – in the future.